night sights for 1st generation cpx-1?

Forum for the discussion of SCCY CPX-1 & CPX-2 9mm compact pistol modifications, holsters, and other after-market items.

night sights for 1st generation cpx-1?

Postby flsportsman21 » Thu Jan 26, 2012 6:36 pm

I seen an older post where someone asked about night sights and I was. Wondering if anyone had discovered a set? I do a lot of late night hog hunting and the factory sights are not visible. Has anyone found some or even custom made a set? If not I may try my luck custom making a set from a similar set I found in a cabelas shooting magazine. Thanks guys and I hope to hear back from you guys.
SCCY CPX-1
S/N XX94XX.
I support the right to arm bears
flsportsman21
New Member
 
Posts: 10
Joined: Wed Jan 25, 2012 11:01 pm

Re: night sights for 1st generation cpx-1?

Postby flsportsman21 » Thu Jan 26, 2012 10:13 pm

So guys I found a cheap substitute for truglo sights for our guns, searched night sights on Google for handguns and this is what I found, no tools needed if I can find these at a local store I will buy and test them. They have great reviews and some people say the glow for 18 hours in pure darkness.

http://www.nitesiters.com/Nitesiters_Ha ... ights.html
SCCY CPX-1
S/N XX94XX.
I support the right to arm bears
flsportsman21
New Member
 
Posts: 10
Joined: Wed Jan 25, 2012 11:01 pm

Re: night sights for 1st generation cpx-1?

Postby HootmonSccy » Thu Jan 26, 2012 11:43 pm

Please update once you get them...
I had a dot fall off my rear site and I'd just as soon go this route as nail polish or bugging SCCY for a new one...
Image
SKYY S/N XXX69XX
"They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety."
Benjamin Franklin
User avatar
HootmonSccy
Topic Moderator
 
Posts: 2061
Joined: Wed Aug 26, 2009 10:42 am
Location: Tampa Bay, Florida

Re: night sights for 1st generation cpx-1?

Postby flsportsman21 » Fri Jan 27, 2012 2:29 am

Will do! May not be for a week or two before I get the extra money. My fiance had a baby 2 months ago.
SCCY CPX-1
S/N XX94XX.
I support the right to arm bears
flsportsman21
New Member
 
Posts: 10
Joined: Wed Jan 25, 2012 11:01 pm

Re: night sights for 1st generation cpx-1?

Postby HootmonSccy » Fri Jan 27, 2012 6:31 am

flsportsman21 wrote:Will do! May not be for a week or two before I get the extra money. My fiance had a baby 2 months ago.

I understand.. No rush..
Image
SKYY S/N XXX69XX
"They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety."
Benjamin Franklin
User avatar
HootmonSccy
Topic Moderator
 
Posts: 2061
Joined: Wed Aug 26, 2009 10:42 am
Location: Tampa Bay, Florida

Re: night sights for 1st generation cpx-1?

Postby scookkay » Mon Jan 30, 2012 5:33 pm

I bought phosphorus glow in the dark sight paint off eBay. Works great and veil has enough to do about 30 pistols for 10 bucks delivered
scookkay
New Member
 
Posts: 12
Joined: Sun Oct 12, 2008 4:11 pm
Location: midway ky

Re: night sights for 1st generation cpx-1?

Postby flsportsman21 » Mon Jan 30, 2012 11:49 pm

True that, I'm gonna try the night siters this following week I hope.. My dad and I just got work for the first time in over a month.
SCCY CPX-1
S/N XX94XX.
I support the right to arm bears
flsportsman21
New Member
 
Posts: 10
Joined: Wed Jan 25, 2012 11:01 pm

Re: night sights for 1st generation cpx-1?

Postby Tnducknut » Fri Feb 24, 2012 8:07 pm

Anyone have any luck. I just bought the CPX-1 from a private onwer and didn't realize until I got home that there is not even ANY white dots to use???? Any ideas or is this a factory defect? :?:
Tnducknut
New Member
 
Posts: 37
Joined: Fri Feb 24, 2012 7:53 pm

Re: night sights for 1st generation cpx-1?

Postby HootmonSccy » Fri Feb 24, 2012 10:08 pm

Tnducknut wrote:Anyone have any luck. I just bought the CPX-1 from a private onwer and didn't realize until I got home that there is not even ANY white dots to use???? Any ideas or is this a factory defect? :?:

First, welcome to the forum...
Not too unusual to loose a dot, but never heard of three missing..
Did you get a gen 1 or 2? A gen 1 has horizontal lines running across the sides of the handle... A hint at your S/N would help... (Xx23xxx)..
Image
SKYY S/N XXX69XX
"They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety."
Benjamin Franklin
User avatar
HootmonSccy
Topic Moderator
 
Posts: 2061
Joined: Wed Aug 26, 2009 10:42 am
Location: Tampa Bay, Florida

Re: night sights for 1st generation cpx-1?

Postby Tnducknut » Fri Mar 02, 2012 4:11 am

Serial is 040### it is the BLK CPX-1. I can send a pic if you would like I found it odd myself.
Tnducknut
New Member
 
Posts: 37
Joined: Fri Feb 24, 2012 7:53 pm

Re: night sights for 1st generation cpx-1?

Postby HootmonSccy » Fri Mar 02, 2012 6:51 am

Tnducknut wrote:Serial is 040### it is the BLK CPX-1. I can send a pic if you would like I found it odd myself.


Gen 1 on the bottom left, Gen 2 on the top right (CPX-2 shown, but same as CPX-1, just no safety).. Color does not matter..

Image
Image
SKYY S/N XXX69XX
"They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety."
Benjamin Franklin
User avatar
HootmonSccy
Topic Moderator
 
Posts: 2061
Joined: Wed Aug 26, 2009 10:42 am
Location: Tampa Bay, Florida

Re: night sights for 1st generation cpx-1?

Postby Tnducknut » Sat Mar 03, 2012 7:08 pm

I have the gen 1 mine has the lines on the grip.
Tnducknut
New Member
 
Posts: 37
Joined: Fri Feb 24, 2012 7:53 pm

Re: night sights for 1st generation cpx-1?

Postby scookkay » Mon Mar 05, 2012 8:24 am

scookkay
New Member
 
Posts: 12
Joined: Sun Oct 12, 2008 4:11 pm
Location: midway ky

Re: night sights for 1st generation cpx-1?

Postby Tnducknut » Mon Mar 05, 2012 9:48 pm

Cool I sent you a email for the pics.
Tnducknut
New Member
 
Posts: 37
Joined: Fri Feb 24, 2012 7:53 pm


Return to SCCY CPX-1 & CPX-2 Accessories

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

Join Florida Carry